13Aug

Maintenance method and use requirements of diamond saw blades

If the diamond saw blade is not used immediately, it should be laid flat or suspended by the inner hole. The flat saw blade should not be stacked with other objects or feet, and should be protected against moisture and rust.

12Aug

Factors affecting the life of resin bond grinding wheels

The grinding wheel is one of the larger amount and range of use in the grinding tool, so we pay more attention to its life. In addition to the normal wear and tear, there are other reasons that can cause this phenomenon.

09Aug

Factors affecting the cutting efficiency of diamond saw blades

Saw blade line speed: In actual work, the linear speed of the diamond saw blade is limited by the condition of the equipment, the quality of the saw blade and the nature of the sawed stone.

09Aug

How to distinguish the quality of diamond saw blades?

observe the corundum exposed on the diamond segment and observe its concentration and distribution. A good diamond saw blade, the content of silicon carbide is not too small, but it should not be too much, and it is evenly

09Aug

Method for improving the performance of diamond saw blades

The method for improving the performance of the diamond saw blade is subjected to a cold-pressing-hot sintering process to perform vacuum protection atmosphere sintering.

09Aug

Factors affecting the hardness of the diamond wheel

In the grinding of diamond grinding wheel, its hardness is very important, and the impact on the grinding wheel is relatively large. The hardness of the diamond grinding wheel refers to the difficulty of falling the abrasive grain from the

02Aug

Important factors that affect diamond blade cutting performance

Cutting hard aggregates can shorten the life span of your blade, slow down the cutting rate, and thus uses more power.

30Jul

Thermal stable polycrystalline diamond

Thermal stable polycrystalline diamond is the diamond polymer produced by diamond & binding agent under high temperature and ultra-high pressure.

24Jul

Concrete Saws and Diamond Blades(Grinding Wheel)

Used to cut concrete, asphalt, brick, and other stone-like materials, concrete saws are the most effective power tool in the concrete cutting industry today.

12Jul

The choice of grinding wheel hardness

When grinding hard materials, select a softer grinding wheel, whereas when grinding soft materials, a harder grinding wheel should be selected.

05Jul

Advantages of natural diamond wire drawing die

Changsha 3 Better Natural diamond wire die, chooes top-quality natural diamond material, with the advantages of strong abrasion resistance, high finish, long service life and so on, is a necessary tool for wire and cable wire drawing die factory.

28Jun

PDC cutter(Polycrystalline Diamond Compact)for different applications

PDC cutter(Polycrystalline Diamond Compact) is composed of polycrystalline diamond(PCD) and cemented carbide substrate,which is a kind of super-hard composite produced under ultra high pressure and ultra high temperature.

21Jun

Diamond Segment promotion for our company's 10th anniversary

Diamond Segment promotion for our company's 10th anniversary

14Jun

Characteristics of natural diamond wire die

natural diamond wire die, chooes top-quality natural diamond material, with the advantages of strong abrasion resistance, high finish, long service life and so on, is a necessary tool for wire and cable wire drawing die factory.

06Jun

The application of diamond grinding wheel

The high precision diamond grinding wheel are mainly used for:molding and processing of cemented carbide,ceramics,semiconductor materials,composites and other materials.

31May

PDC drill bits

Polycrystalline diamond materials, for use in polycrystalline diamond compact (PDC) bits, are one of the most important material advances for oil drilling tools in recent years.

22May

Stone polishing tools

Floor polishing pad is mainly used for restoring and grinding floor of stone, to achieve pretty excellent effects by increasing the glossiness and beauty of the floor,

17May

Correct application of diamond drawing dies

Use lubricants with good lubrication performance During the tensile process, the quality of the lubricant and the adequacy of the lubricant supply affect the service life of the pull die.

10May

The importance of the resin CBN wheel to automobile industry

According to the latest industry news, the automotive industry will to be a pillar industry to access a relatively high-speed development for a long time.The abrasive industry will also play an important role, especially as the resin CBN grinding wheel contributes more to the automotive industry.

26Apr

FAQ Of Diamond Saw Blade

hardness, abrasive and particle size of stone. If possible, please provide samples or pictures.

18Apr

Influence of drawing die hole type design on its service life

At present, foreign industrial developed countries generally adopt the "linear" drawing die proposed by American T.Maxwall and E.C.Kennth in the early 80, from the measurement of this kind of drawing die produced abroad, the characteristics of its pore type mainly have the following 4 aspects

12Apr

Arix Diamond segment

n the production process of diamond segments, due to the overcoming of diamond distribution from the original random disordered state, into a preset ordered diamond according to the characteristics of product use, so that when using diamond saw blade cutting, the force is uniform, reduce power consumption, reduce noise and greatly improve its sharpness.

03Apr

The advantages of the Electroplating Diamond Grinding Wheel

1.The process of the electroplating is simple, less investment, easy to manufacture, environmental protection, pollution-free, energy saving and consumption reduction and there is little powder dust;

28Mar

How to Maintain Diamond Saw Blade ?

When the diamond saw blade not using , please hang it squarely or through the inner hole. The flat diamond saw blade can not be presse by others , or trampled with feet, and pay attention to moisture-proof and rust-proof .

20Mar

How to choose diamond saw blade

Generally speaking, when cutting hard or abrasive subjects such as granite, marble, brick, concrete, asphalt, steel and other similar subjects, diamond saw blades have a good reputation in the global industry due to their outstanding performance in cutting. Choosing right diamond saw blades for cutting is necessary to perform cutting tasks well.