Why diamond polishing pad consume fast?

Diamond polishing pads will consume too quickly before you use them, so do you know the reason for the rapid consumption of diamond polishing pads?

First. Reasons for the rapid consumption of diamond polishing pads

Diamond polishing pads are divided into soft foundation, medium foundation and hard foundation. Hard foundation diamond polishing pads are used on the ground with poor compactness. Soft foundation diamond polishing pads are used for better quality. Generally, medium foundation can be used on the ground. The quality of some concrete floors is relatively poor, especially the refurbishment of some old floors. The flatness is not good, the ground is loose, and the water-milling process is prone to produce a lot of mud, which causes the diamond polishing pad to be consumed very quickly. The main reason for the consumption of diamond polishing pads during the refurbishing process.

Second, the solution

1. For the ground with poor quality, it is recommended that you use medium and large floor grinders, and then use dry grinding after spraying water on the ground to dry it. Use a No. 30 hard-based metal diamond polishing pad first, and loosen the surface layer. Leveling treatment, and then using a 100-type hard or soft base metal diamond polishing pad and then processing and polishing, the basic hardness and flatness are not treated, and the subsequent work is much simpler.

2. If you encounter sand with poor ground foundation density and diamond polishing pads, they will wear each other, so it is easy to accelerate the consumption of diamond polishing pads. At this time, we can first perform purification treatment to improve the ground. Density, and then grinding can save the use of diamond polishing pads.

3. It is recommended to use diamond diamond polishing pads or concrete thick diamond polishing pads for ground leveling and rough grinding. Fine sand diamond polishing pads can be used without rough sand diamond polishing pads.

4. It is recommended to use sharp resin diamond polishing pads for hard concrete floors, increase machine weight, reduce mill speed, and reduce forward speed.

5. It is recommended to use durable resin diamond polishing pads for soft concrete floors, increase the speed of the mill, and speed up the advance.

6. When using diamond polishing pads, do not use jump numbers. According to the normal use situation, dry grinding saves more consumables than water grinding, but water grinding treatment will make the ground more uniform and delicate.

The above is the reason why the diamond polishing pad is consumed quickly, and the solution. When using the operation, different diamond polishing pads are selected for different floors, which can improve the work efficiency and the service life of the soft abrasive disc. Any questions are welcome to consult.